Virgin HDPE, LDPE, LLDPE Kunststoffgranulat
Basisinformation
Modell: PE
Produktbeschreibung
LDPE-Folienqualität / LDPE-Spritzgussklasse / LDPE-Extrusionsgrad / LDPE-Blasform
1. Spezifikation:
LDPE Injection Grade
Tests |
Value |
Unit |
Melt Flow Rate (MFR) |
15 |
g/10min |
Density |
0.922 |
g/cm3 |
Tensile Yield Strength |
7 |
Mpa |
Elongation at Break |
75 |
% |
Wien Softening Point |
85 |
°C |
LDPE Filmqualität
Tests |
Value |
Unit |
Melt Flow Rate (MFR) |
2 |
g/10min |
Density |
0.9225 |
g/cm3 |
Tensile Strength |
9 |
Mpa |
Elongation at Break |
500 |
% |
Fish eye max(0.3-2mm) |
30 |
n/1200cm2 |
Stripes |
20 |
cm/20m3 |
Für Extrusion Verpackungsfolie, Seil, gewebte Beutel, Fischernetze, Wasserleitungen; Einspritzung von Low-End-Ware und Gehäuse, nicht tragende Last Komponenten, Kunststoff-Box, Umsatz-Box; Extrusionsblasformbehälter, Hohlprodukte, Flaschen.
3. Verschiedene Typen / Klasse:
Grade |
Type |
MFR (g/10min) |
Density (g/cm3) |
Application |
LD100-AC |
Film material |
2 |
0.9225 |
For agricultural film, shrinkable film, transparent film, laminating film, shopping bag all kinds of packaging bag, |
LD103 |
Film material |
1.05 |
0.921 |
For agricultural film, shrinkable film, lining, disposable bag, shopping bag, all kinds of packaging bag |
LD150 |
Film material |
0.75 |
0.9225 |
For agricultural film, shrinkable film, packaging film, laminate film, shopping bag, power cable insulation silicane cross-linking, blow molding, tubes and pipes |
LD160 |
Film material |
4 |
0.9225 |
For lining, transparent film, laminate film, ultrathin film, all kinds of packaging bag, casting film, injection molding |
LD165 |
Heavy-duty packing film |
0.33 |
0.922 |
For large greenhouse film, agricultural film, shrinkable film, lining, |
LD605 |
Injection molding |
6 |
0.922 |
Ultrathin film, injection molding |
LD615 |
Injection molding, master batch |
15 |
0.922 |
For plastic injection, master batch |
LD100BW |
Cable material |
2.2 |
0.923 |
Cross-linking cable base material |
LD358 |
Canopy film, pipe |
0.28 |
0.925 |
Vessels , automobile fittings, bottles |
LD369 |
Film material, pipe |
0.5 |
0.9305 |
For agricultural film, large greenhouse film, COEX multilayer film, tubes and pipes |
LD607 |
Injection molding\film material |
7.5 |
0.9215 |
Blow film and foam |
4. Verpackung: in 25kg Beutel, 18-20mt in einem 20 'FCL, 25mt in einem 40'FCL5. Produktfoto:
Produktgruppe : Plastik Materialien
Premium Related Products